AegisGuard™ LP standard models (shown above) protect users from unwanted electrical and 1G - 5G, future 5G, and initial 6G 1 THz. device and network EMF (electromagnetic field) and RF (radiofrequency) radiation. Their unsurpassed shielding range options exceed all regulated allocated and unallocated radiofrequencies presented in the currentFCCOnline Table Of Frequency Allocations, providing superior shielding protection for home, office, factory, healthcare, aerospace, military, security and government applications from unwanted electrical device, power line, transformer, and all fixed and mobile terrestrial, satellite and sea-based antenna and network airborne frequencies in use globally.
These models protect users from 1G to 4G-LTE 86 GHz., 5G 96, 100, 300 and 600 GHz., and 6G 1 THz. wireless communication up to their maximum frequency range, providing permanent shielding protection up to 99.998%for 5 Hz. to 30 GHz., 120 GHz., 360 GHz, and 1.1 THz. shielding applications with power levels from 1 milliwatt (0.001 Watt) to 25 Watts measured at the point of contact. Custom models up to 4.8 THz., including future 6G Advanced 3.3 THz., with power levels up to 100 kilowatts (kW), are currently available.
This shielding effectiveness and RF range exceeds the requirements specified by MIL-STD-285, all ASTM-4935-xx, IEEE 299 and IEEE 802.nn versions, NSA 94-106, ETSI EN 302 567 V2.2.0 (2020-12), and Human RF exposure limits as set forth in FCC OET Bulletin 65, providing current and future RF and EMF countermeasure SCIF and SAPF solutions for sensitive applications.
The low odor, very low VOC additives are supplied in 4 oz. (118.29 ml) containers, and provide EMF and RF shielding protection from 5 Hz. up to to the maximum frequency of the selected model. The contents are mixed with one gallon of any latex or acrylic primer, paint, and most other soap and water cleanup surface coating brands by the user. Simply apply two coats, and topcoat with any surface coating. Grounding is not required.
When properly applied, unsurpassed shielding effectiveness is derived from unwanted electrical and wireless device and network radiation frequencies and fields within the selected model frequency range. Simply mix contents of one 4 oz. (118.25 ml) container with 1 US or Imperial gallon or 5 liter surface coating brand, apply 2 coats as you would with any paint, and topcoat if necessary, following the coating manufacturer's application, safety and cleanup instructions. SeeInstructions for additional information.
All models are non-conductive, non-absorbent, contain no silver, copper, graphene, carbon, graphite, nickel (toxic), or other metal, and grounding is not required. Proprietary discriminating deflection and oscillating shielding technologies protect users from unwanted airborne electrical and wireless radiation by deflecting and safely breaking apart (scattering) frequencies upon contact with shielded surfaces, while allowing desired wireless communication to pass through unimpeded.
Following their 2005 introduction, AegisGuard™ LP has been the #1 doctor recommended EMF and RF shielding paint products for patientsconcerned about the adverse health effects attributed to electrical and wireless frequencies and their fieldsupon their bodies, and patients suffering from the adverse effects and discomfort of electrohypersensitivityor radiofrequency (EHS, ES, IEI-EMF or RF), particularly children.
Prior to the 30 GHz. AegisGuard™ LP product availability announcement in 200, six homes close to power transmission lines and cell phone or microwave towers owned by electrosensitive individuals in three countries were successfully tested by three independent laboratories for a continuous one year period to confirm consistent shielding effectiveness, without degradation. AegisGuard™ LS spray was used to shield the windows. None of the volunteer homeowners reported discomfort.
All higher frequency AegisGuard™ LP models were tested independently and/or at customer locations prior to public announcement, and continuously tested. EHS efficacy was confirmed by EHSvolunteers wearing full-body shielded garments at locations inside and outside high technology customer manufacturing facilities where frequencies up to 1.1 THz. were present, and none of the volunteers reported discomfort,
AegisGuard™ LP is part of theAegisGuard™ L (Life) Series family of laundry, paint and spray RF and EMF shielding products. They are available in individual and five-packModels for each supported frequency range, and compatible with all other AegisGuard™ products.
See Shielding Applications for assistance with selecting appropriate products for your application.
See AegisGuard™ L (Life) Series for information about their proprietary discriminatory shielding technology and how they protect users.
|
[ Home ] [Products ] [ Shop ] [ Privacy ] [About ] [ Contact ] [ Site Map ]
Copyright © 2024 Aegis Corporation- All Rights Reserved
